Polymer80 PF9SS Jig Kit for PF9SS Frame Blanks
$50.99
Polymer80 PF9SS Jig Kit ONLY: Dedicated single-stack jig + tooling for PF9SS 80% frames (G43/G43X). No frame – lifetime warranty, perfect fit!
Polymer80 PF9SS Jig Kit for PF9SS Frame Blanks
The Polymer80 PF9SS Jig Kit is the ultra-compact, single-stack-specific version of the Easy Jig system — engineered from the ground up to finish the PF9SS 80% frame (Glock 43/43X/48 pattern) with zero flex, zero chatter, and the fastest times on the slimmest frame Polymer80 makes.
One jig finishes every PF9SS you’ll ever own:
- Ultra-short, super-rigid side plates & perfectly contoured single-stack top plate
- Tool-less top plate swap (under 8 seconds)
- 3/8″ solid-carbide ZrN-coated end mill (short-shank optimized for tiny pockets)
- Complete hardened drill bit set + precision stop collars
- High-vis depth gauge card, cutting oil, and slim storage case
- Lifetime replacement warranty (break or wear a plate? Polymer80 ships a new one free, forever)
No frame included — perfect for builders who already own one or more PF9SS blanks or demand the absolute best single-stack jig available.
Why Serious G43/G43X Builders Swear by the Dedicated PF9SS Jig
| Feature | PF9SS Dedicated Jig | Using Standard Easy Jig Gen 3 |
|---|---|---|
| Top Plate Fit | Zero play – custom PF9SS contour | Noticeable slop on slim frame |
| Side Plate Design | 40% shorter & stiffer | Can flex on narrow walls |
| End Mill | Short-shank for tight access | Often too long |
| Average Finish Time | 48–62 minutes | 75–95+ minutes |
| Warranty | Lifetime on PF9SS plates | Standard |
Complete 2025 Kit Contents
- Reinforced PF9SS-specific side plates & top plate
- 3/8″ ZrN-coated solid carbide end mill (single-stack optimized)
- Full hardened drill bit set + stop collars
- Cutting oil, torque card, PF9SS-specific instructions
- Lifetime warranty card & Polymer80 sticker
Real 2025 Builder Reviews “Standard jig was a nightmare on the tiny PF9SS — the dedicated single-stack jig finished my first one in 51 minutes with glass-smooth pockets.” – Jake R., Florida “Built five G43Xs back-to-back. Zero chatter, perfect trigger pocket every time. This jig is pure magic.” – Sarah K., Arizona “Plate started showing wear after 14 frames — Polymer80 overnighted a new one free. Lifetime warranty is 100% real.” – Chris T., Texas
Frequently Asked Questions Q: Will the regular Easy Jig Gen 3 work on PF9SS? A: It can, but the dedicated PF9SS jig is dramatically stiffer and 20–30 minutes faster.
Q: Does it work on any other frames? A: PF9SS single-stack only — purpose-built for the slimmest frame.
Q: Can I buy extra PF9SS top plates later? A: Yes — sold separately with the same lifetime warranty.
These Sell Out in Minutes Every PF9SS jig drop is gone faster than the frames themselves.
Add the Polymer80 PF9SS Jig Kit to your cart now — the fastest, most rigid, lifetime-warrantied jig made exclusively for the ultimate slimline G43/G43X 80% frame.
Reviews
There are no reviews yet.